silicone resin

1. Electronic tag and the metal steel are formed in one, and packaged in environmentally friendly silicone resin, water-proof, anti-collision.
   将电子标签与金属钢材一体成型，并封装于环保树脂矽胶内，防水、防撞。
2. Method and progress of silicone resin modification by epoxy resin Reserch on Toughening Modification of Cyanate Ester Resin
   环氧树脂化学改性有机硅树脂的方法综述热塑性树脂增韧氰酸酯树脂的研究进展
3. Silicone fiberglass sleeving, woven as sleeving by non-alkali fiberglass and coated with silicone Resin in high temperature.
   硅树脂玻璃纤维套管，是由无碱玻璃纤维纱编织成管后，涂以硅树脂高温处理而成。
4. Single pack silicone resin based with aluminum flakes.
   单组份、基于薄铝片的硅树脂。
5. Effect of Nano-Titanium Dioxide on Mass Loss and Thermal Performance of Silicone Rubber Reinforced by MQ Silicone Resin Under VUV Irradiation
   纳米TiO2对真空紫外辐照下MQ硅树脂增强硅橡胶质损及热性能的影响
6. Research of the Preparation Process of Vinyl-substituted MQ Silicone Resin
   甲基乙烯基MQ硅树脂的制备工艺研究
7. The methyl phenyl silicone resin for heat resistant coatings was prepared by converse hydrolysis-polycondensation of chlorosilane.
   采用逆水解法进行氯硅烷水解&缩聚反应，制备了适用于耐高温涂料的甲基苯基硅树脂。
8. The epoxy-titanium silicone resin prepared by the method has high light stability and environmental friendliness;
   本发明制备的环氧-钛硅树脂具有良好的光稳定性和环境友好性；
9. Study of Structure and Properties for TiO_2, Silicone Resin and Polyurethane Modified Epoxy Resin
   二氧化钛、硅树脂和聚氨酯改性环氧树脂的结构与性能研究
10. Synthesis of MQ silicone resin and its application in silicone pressure sensitive adhesive;
    本文主要介绍了压敏胶粘剂所用增粘树脂的种类、特征及其选用的方法。
11. The production methods and technical features of monosilane, silicone oil, silicone water-proofing agent and silicone resin using the high boiling silane were described.
    简述了利用硅烷高沸物制备单硅烷、硅油、有机硅防水剂、有机硅树脂、消泡剂等产品的生产方法及技术特点。
12. The silicone resin marine anti-fouling coating was prepared by using NaPT as the marine anti-fouling agents and silicone resin as the basic material.
    以苯甲酸钠为防污剂、硅树脂为基料，制得硅树脂海洋防附着涂料。
13. The influences of the curing and pyrolysis process of silicone resin and those of the inert and active fillers were especially discussed.
    探讨了硅树脂固化裂解过程、惰性及活性填料对连接性能的影响。
14. Silicone alkyd coating are based on either the reaction product of a silicone intermediate and an alkyd resin, or a cold blend of silicone resin and compatible alkyd resin.
    硅多元醇酸树脂涂料在硅树脂和聚酯反应为基础的而得到的产品。或硅树脂和它相容性的多元醇酸树脂共混物。
15. Study on Epoxy Modified Silicone Resin Coatings for Carbon Fiber Composite Case
    碳纤维复合材料壳体用环氧改性有机硅涂料的研制
16. The applications of silicone oil, silicone rubber and silicone resin in plastics processing are intro ˉ duced.
    分别阐述了硅油、硅橡胶、硅树脂在塑料加工中的应用。
17. An epoxy modified silicone resin, which had the features of epoxy and silicone resins, was prepared by the polymerization of epoxy resin with compatible and reactive silicone oligomer.
    采用分子量适中的环氧树脂对反应性有机硅低聚物进行共聚改性，充分利用有机硅树脂的耐高温性和环氧树脂的防腐性及高附着力。
18. This paper studies the properties of epoxy resin adhesive modified with silicone resin by differential scanning calorimetry, thermogravimetric analysis.
    通过差示扫描量热（DSC），热解重量分析（TGA）和粘接强度的测定，对硅氧烷树脂改性的环氧树脂胶粘剂的性能进行了研究。
19. The mechanical properties and thermal stability of short PET fiber and wollastonite reinforced silicone resin were studied respectively.
    分别用PET短纤维和硅灰石（无机针状晶须）增强甲基乙烯基硅树脂，研究了纤维长度、含量与复合材料力学性能的关系，并考察了增强纤维对硅树脂热稳定性的影响。
20. The silicone resin is synthesized using hydrolysis-polycondensation method from phenyl and methyl chlorosilane, and the factors influencing this synthesis are investigated.
    以甲基和苯基氯硅烷为单体，采用水解缩聚的方法合成有机硅树脂，并对影响有机硅树脂合成的有关因素进行了研究。
21. Research on synthesis and curing of heat-resistant silicone resin
    耐热硅树脂的合成与固化性能的研究
22. Polyurethane coating system modified with silicone resin is introduced?
    介绍有机硅改性聚氨酯涂料的工艺及性能。
23. The results show that the properties of SiO2 matrix composite are improved by using silicone resin.
    试验表明有机硅树脂能够有效地提高SiO2基复合材料的各项性能。
24. Effects of Silane Coupling Agent on High Temperature Resistance of Epoxy Modified Silicone Resin
    硅烷偶联剂对环氧改性有机硅树脂耐高温性能的影响
25. The tensile properties of short PET fiber/ wollastonite/ silicone resin hybrid composites have been studied.
    研究了PET短纤维和硅灰石晶须混杂增强硅树脂复合材料的拉伸性能。
26. The flame retardant modification of polycarbonate ( PC) with methyl-phenyl silicone resin is studied.
    采用苯基甲基硅树脂对聚碳酸酯（PC）进行阻燃改性。
27. Study on the Properties of Epoxy Resin Adhesive Modified with Silicone Resin
    硅氧烷树脂改性环氧树脂胶粘剂性能的研究
28. The preparation method of epoxy resin, silica, silicone resin, silicone modified epoxy resins are reviewed.
    对环氧树脂、硅溶胶、有机硅树脂、有机硅改性环氧树脂的制备方法进行了综述。
29. According to the comprehensive requirements about heat resistance and corrosion resistance of coating, we determine the amount of modified epoxy resin, fluoro silicone resin and filler.
    根据涂层耐热和防腐的综合要求，我们最终确定了改性环氧树脂和氟硅树脂、填料在体系中的含量。
30. Comparing with EP/ Silicone resin, LCE/ EP/ Silicone resins have much better water resistance.
    与EP/Silicone树脂相比，LCE/EP/Silicone树脂体系具有更佳的抗水性。

noun

1. a polymeric silicone compound